FAQ – Accessories


Visit CentipedeTool.com/Accessories for current accessory details

Current Accessories

All accessories that are currently available are listed below and include a link to a retail web site where it can be purchased.

New Accessories

We’re just getting started and more accessories are in the pipeline…

Questions?

 


FAQ MENU


 

PLEASE NOTE: IF YOU RECEIVED A KIT IN AN ALL BLACK BAG, The P-Tops have been revised since our crowdfunded production runs. The accessories listed on this page will not be compatible with the P-Tops that came with your unit. CLICK HERE to review our upgrade kits, as the new P-Tops will fit the older models.


A01 P-Tops Sets

Replacement polymer surface pads

  • Protect load, blade and struts from damage and marking
  • Thick profile avoids contact between cutting blade and steel strut
  • Standard 3/4″ hex nuts (included) for easy replacement
  • Spins 360 degrees for convenient positioning of accessories

A0103 – 3 PC P-Top Assembly Set – $6.99

PLEASE ORDER FROM ABC SUPPLY OR EAGLE AMERICA

 

A02 X-Cups Sets

2×4 drop-in supports

  • Quick setup for traditional sawhorse applications or table/bench top substrate
  • Accommodates commonly found standard 2″x4″ boards
  • Quick cuts without clamping

A0202 – 2 PC X-Cup Set – $4.99

PLEASE ORDER FROM ABC SUPPLY OR EAGLE AMERICA

A03 Quick Clamps Sets

Tension clamps

  • Secure table/bench tops quickly, without tools
  • Hold boards in place during the cut
  • Soft overmold stem provides maximum wedge tension

A0302 – 2 PC Quick Clamp Set – $7.99

PLEASE ORDER FROM ABC SUPPLY OR EAGLE AMERICA

A04 Hooks Sets

P-Top hanging hooks

  • Keep tools and accessories out of the way and close at hand
  • Easy installation – slide up through P-Top slots, rotate and drop in
  • Carries heavy weight when there is a load on the frame
  • Organized workspaces with important tools off the ground

A0402 – 2 PC Hook Set – $4.99

PLEASE ORDER FROM EAGLE AMERICA

 

A05 Risers Sets

Worktop height extensions

  • Raise table/bench tops to comfortable 36″ countertop working height
  • Allows use of P-Top accessories
  • Easy installation – remove P-Top, install Risers with thumb nut, re-install P-top

A0506 – 6 PC Riser Set – $20.99

PLEASE ORDER FROM EAGLE AMERICA

A0515 – 15 PC Riser Set – Coming Soon

 

A06 Non-Slips Sets

High friction, soft surface pads

  • Improves table/bench top stability without clamps
  • Low profile solution for holding table/bench tops in place
  • Fits in either P-Top hole, allowing for use of other accessories

A0606 – 6 PC Non-Slip Set – $10.99

A0615 – 15 PC Non-Slip Set – $20.99

PLEASE ORDER FROM EAGLE AMERICA

C0x00 – Carry/Storage Bags

Protected portability

  • Rugged canvas carry bag for transport and storage
  • Room for accessories and extras
  • Zips shut to keep the elements out

C0100 – Sawhorse Carry/Storage Bag – $14.99

C0200 – Support XL Carry/Storage Bag – $18.99

PLEASE ORDER FROM EAGLE AMERICA

C0101 – 1 PC Centipede Sawhorse Carry Strap

Quickest portability

  • Keeps struts bundled together for easy transport
  • Quick setup – just fasten 2 steel thumb clips and go
  • Easy key ring style installation

C0101 – Sawhorse Carry Strap – $9.99
C0201 – Support XL Carry Strap – Coming Soon

 PLEASE CONTACT US TO ORDER

 


FAQ MENU


Compatibility Notice

 

FROM CANADA, UK or EU? Please email us – Service@CentipedeTool.com – to discuss obtaining an Upgrade Kit.

Upgrade Kits

Centipede Sawhorse Upgrade Kit – $15.89 + 8.49 S&H (USPS Priority Mail)

  • 6 EA P-Tops
  • 2 EA Quick Clamps
  • 4 EA X-Cups



 

Centipede Support XL Upgrade Kit – $27.08 + 12.99 S&H (USPS Priority Mail)

  • 12 EA P-Tops – Only the outside P-Tops will be replaced
  • 4 EA Quick Clamps
  • 4 EA X-Cups



Contact us – Service@CentipedeTool.com – to discuss specific/custom upgrade needs!

 


FAQ MENU